Specifications:
|
Dimension:
Aluminum Chassis
|
|
200(w)
x 180(h) x 280(h) mm
|
Chipset:
SIS 650
|
(North)
SiS650
Supports Intel R Pentium 4 processor system bus at 100 MHz
(400 MHz Data Bus)
Support DDR200/266 DDR SDRAM interface
Support AGP interface
Support 533MB/s MuTIOL Connect to SiS961
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) SiS961
Support UDMA 33/66/100 IDE interface
Support USB1.1 interface
Support ACPI 1.0b compliant power management
Integrated Real Time Clock (RTC) with 256B CMOS SRAM
Supports PCI interface
|
CPU:
Socket 478 type CPU
|
|
Intel
Pentium 4 in the 478 pin package with 400MHz FSB
|
Form
Factor
|
|
Flex
ATX:
|
Memory
|
2
x 184 pin DDR SDRAM Socket
Support DDR200/266 un-buffer DDR SDRAM up to 2GB capacity
|
Graphics:
Build in SiS 650
|
AGP
v2.0 Compliant
Built-in a high performance 256-bit 3D engine
Built-in GDI+ Accelerator
Built-in programmable 24-bit true-color RAMDAC up to 333 MHz
pixel clock
|
Audio:
C-Media 8738-PCI-6CH/LX
|
Support
5.1 speakers, C3DX positional audio in 6 CH speaker mode
HRTF-3D positional audio, supporting Direct Sound 3D and A3D
interface
Legacy SBPRO compatible
|
On
board 1394a chipset (FireWire)
|
|
Lucent
FW323
1394a OHCI link and PHY in single package
Complies with 1394 OHCI specification revision 1.0
Provides three fully compliant cable ports
Support 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
|
Ethernet
|
On
board Realtek 8139C
IEEE 802.3u 100Base-T specifications compliant
10 Mb/s and 100 Mb/s operation
Supports Wake-On-LAN function
|
| TV-Out
Function:
|
|
Sis
301
Supports
PAL and NTSC Systems
Supports Composite, S-Video, and Component R/G/B Output
Signals.
Supports maximum input active resolution at PAL and NTSC
system to 800x600.
|
Expansion
Bus
|
2
x PCI
PCI 2.2 compliant, 32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
|
LPC
I/O: ITE 8705F
|
|
Comply
with Intel Low Pin Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two
16C550 UARTs
Supports two standard Serial Ports
Floppy
Disk Controller
Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
Enhanced digital data separator
3-Mode drives supported
Keyboard
Controller
Support power-failure resume and power button de-bounce
|
H/W
Monitor: Built in ITE 8705F
|
2
thermal inputs from remote thermal resistor to monitor system
temperature
1 thermal inputs from thermal diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer inputs
Smart Guardian Controller to provide programmable fan speed
automatic control
|
IDE
|
2
x UltraDMA/100 IDE Channels Master from SiS961
80-pin Cable Backward Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
|
Power
Management
|
|
APM
1.2 compliant
ACPI
1.0 compliant
Support multiple system suspend types- suspend to DRAM,
suspend to disk, and all with hardware automatic wake-up
|
BIOS
|
|
Stored
in 2 Mb LPC flash memory
DMI 2.3
Bootable from Floppy, ATAPI device, USB device, SCSI device
|
Back
Panel Ports and Connectors
|
|
Front
Panel
2 x USB ports
1 x 1394 ports
1 x Mic-In
1 x Speaker-Out
Power-On
Reset
1 x 3.5" bay
1 x 5.25" bay
Back Panel Ports and Connectors
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x VGA port
2 x Serial Port
3 x 1394 ports
1 x S-Video connector
2 x USB ports
1 x RJ45 port
1 x line-in connector
1 x line-out connector
1 x Center/Bass connector
|
Other
connectors and jumpers
|
3
x fan connectors
1 x ATX power connector
1 x 4 pin 12V ATX power connector
Clear CMOS
|
Headers
|
1 x COM port
header
1 sets of 2 x5 pin Front Panel USB header
1 sets of 2 x5 pin Front Panel IEEE1394a header
CD_In header
Microphone_In header
Speaker_Out header
|
